产品规格
最大孔径
104.0000 mm
最小孔径
38.1000 mm
孔长
1.0000 英寸, 25.4 毫米
衬套尺寸
J
衬套类型
QD
内径
1 1/2英寸
安装扭矩
60 in/lb, 60.0 in/lb
整体键
否
材料
球墨铸铁，65级
螺栓数量
3
额定扭矩
1000.0000 lbf, 4448.222 N
轴连接
粗加工孔
产品内容
QD Bushing - Metric Bore/Metric Hardware
- DODGE QD-style 衬套备有常用的精加工孔尺寸和最小的普通孔，用于定制重新镗孔
- DODGE Metric QD 衬套配有公制六角头螺钉和锁紧垫圈
- 备有库存的可重新镗孔衬套，用于定制重新镗孔
- 可从 DODGE 重新镗孔和锯切，仅收取少量额外费用
只能与 DODGE HTD 链轮配合使用进行常规安装（拆卸需要英制螺纹硬件。） 注意：其他人重新镗孔后必须进行锯切
QD Bushings features and Benefits
4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
QD is a registered trademark of Emerson Electric
Conventional Mounting
Easy On* Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
