产品规格
产品内容
Cleveland -
End Mill- Center Cutting Coarse Heavy Duty Single End Square End- Series: RG8- 3/4 in Diameter Cutter- 5-1/4 in Overall Length- 3 in Length of Cut- 4 Flutes- Spiral Flute- 3/4 in Shank Diameter- Right Hand Cutting Direction- 30 deg Helix Angle- Straight/Weldon Flat Shank- Cobalt 8/M42 HSS- TiCN Coated Characteristics and Features * Center cutting design for rapid plunge cutting* High red hardness for high heat conditions* 45 deg chamfer* Multi-flute end mills deliver a smoother finish and are better for peripheral cuts* Multi-flute end mills have a heavy duty cross section for better rigidity* Increased number of flutes mean more cutting edges, providing more cutting action* Coatings reduce heat and abrasion to increase tool life* The increased lubricity of the coating surface reduces material adhesion and built-up edge, enabling even higher feed rates* Coatings reduce the amount of torque required for machining to allow more efficient use of equipment* TiCN (titanium carbonitride) coating in blue-gray color for very aggressive machining of stainless steels and non-ferrous materials* TiCN coating is extremely hard, wear resistant and increase machining speeds 35 to 50% versus bright speeds* Applicable on free machining stainless, alloy steel, med carbon steel and low carbon stee 特点： * 中心切削设计，用于快速切入* 高温条件下具有高红硬性* 45 度倒角* 多刃立铣刀可提供更平滑的表面光洁度，并且更适合外围切削* 多刃立铣刀具有重型横截面，可提供更好的刚性* 刀刃数量的增加意味着更多的切削刃，从而提供更多的切削作用* 涂层减少热量和磨损，从而延长刀具寿命* 涂层表面润滑性的提高减少了材料的粘附和积屑瘤，从而能够实现更高的进给速度* 涂层减少了加工所需的扭矩，从而能够更有效地利用设备* TiCN (碳氮化钛) 涂层呈蓝灰色，用于对不锈钢和有色金属材料进行非常积极的加工* TiCN 涂层非常坚硬、耐磨，并且与亮速相比，可将加工速度提高 35% 到 50%* 适用于易切削不锈钢、合金钢、中碳钢和低碳钢
