产品规格
环境温度
40°C
底座指示器
刚性
导管盒材料
铸铁
设计代码
B
负载等级
CONT
外壳
全封闭风扇冷却(TEFC)
机架
145T
机架材料
铁
马力
1
赫兹
60
绝缘等级
F
逆变器代码
变频器就绪
最大速度
1800 RPM
电机标准
NEMA
电机重量
69
安装布置
F1
极数
6
整体长度
12.88 in
相位
3
功率因数
67
滑轮面代码
STANDARD
转/分钟
1100 - 1200
服务系数
1.15
轴径
0.875IN
轴接地指示器
无轴接地
轴旋转方向
可反转
速度代码
单速
同步转速
1200
电压
575
产品内容
| 输出 | 1 |
| 转速 | 1160 |
| 托盘数量 | 0 |
| 规格编号 | 05E811X260G1 |
| 机座号 | 145T |
| 重量 | 69. 000 LB |
| 倍增器 | SD |
| 外壳 | TEFC |
| 项目类型 | MOTOR（电机） |
| 制造工厂 | FT SMITH |
| 电压 | 575 |
| 极数 | 06 |
| 等级 | STOCK（库存） |
| 类型 | 0526M |
| 状态 | Active（有效） |
| 商品代码 | 8501. 51. 6040 |
| 产地 | US |
| 防爆等级/组 | NONE（无） |
| --- | --- |
| 修订版 | B |
| 状态 | PRD/A |
| 更改 # | 783715 |
| 专有 | No（否） |
| 类型 | AC |
| 产品类型 | 0526M |
| 电气规格 | 05WGX260 |
| CD 图 | CD0006 |
| 外壳 | TEFC |
| 制造工厂 | FT SMITH |
| 机械规格 | 05E811 |
| 布局 | 05LYE811 |
| 机座号 | 145T |
| 安装 | F1 |
| 极数 | 06 |
| 创建日期 | 8/5/2012 |
| 底座 | RG |
| 旋转 | R |
| 绝缘 | F |
| 生效日期 | 2/4/2013 |
| 引线 | 3#18 |
| 文献 | |
| 电气图 | |
| 替代产品 |
ECP83582T-5 的规格历史
| Active | 规格编号 | 工厂 | 日期 | 描述 | |||||
|---|---|---|---|---|---|---|---|---|---|
| 05E811X260G1 | BALDOR/FT SMITH/REC WHSE #5 | 8/7/2012 | 26M 6P TEFC HOR 145T CHEM PROC SP#32-8 | ||||||
| 05E811W653G1 | BALDOR/FT SMITH/REC WHSE #5 | 11/21/2007 | 28M 6P TEFC HOR 145T CHEM PROC SP#32-8 | ||||||
| 铭牌编号 | NP2162E | ||||||||
| --- | --- | ||||||||
| CAT. NO. | ECP83582T-5 | ||||||||
| SPEC. | 05E811X260G1 | ||||||||
| SPEC. | 05E811X260G1 | ||||||||
| 电机重量 | 62 LBS | ||||||||
| HP | 1 | ||||||||
| T. CODE | T3 | ||||||||
| 润滑脂 | POLYREX EM | ||||||||
| 电压 | 575 | ||||||||
| 最大 KVAR | . 59 | ||||||||
| AMP | 1. 4 | ||||||||
| # OF ROTOR BARS | 27 | ||||||||
| # OF STATOR SLOTS | 36 | ||||||||
| 转速 | 1160 | ||||||||
| BLANK | |||||||||
| 机座号 | 145T | HZ | 60 | PH | 3 | HTR-VOLTS | N/A | HTR-AMPS | N/A |
| SER. F. | 1. 15 | CODE | K | DES | B | CL | F | 最大 SPACE HEATER TEMP. | N/A |
| NEMA-NOM-EFF | 82. 5 | ||||||||
| PF | 66 | ||||||||
| G. MIN. EFF | 80. 0 | ||||||||
| CC | 010A | ||||||||
| 额定值 | 40C AMB-CONT | ||||||||
| DE | 6205 | ||||||||
| ODE | 6205 | ||||||||
| ENCL | TEFC | ||||||||
| SN | |||||||||
一般特性
| 满载转矩 | 4. 53 LB-FT |
| 启动配置 | DOL |
| 空载电流 | 1. 16 Amps |
| 击穿转矩 | 14. 6 LB-FT |
| 线-线电阻 @ 25°C. | 17. 6 Ohms A Ph / 0 Ohms B Ph |
| 上拉转矩 | 11. 1 LB-FT |
| 额定负载下的温升 | 35°C |
| 锁定转子转矩 | 12 LB-FT |
| S. F. 负载下的温升 | 41°C |
| 启动电流 | 10. 4 Amps |
负载特性
| 额定负载的百分比 | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| 功率因数 | 27 | 45 | 57 | 66 | 72 | 75 | 70 |
| 效率 | 70. 2 | 80 | 82. 7 | 83. 1 | 81. 8 | 80 | 82. 3 |
| 速度 (RPM) | 1192 | 1182 | 1171 | 1160 | 1146 | 1131 | 1152 |
| 线路安培数 | 1. 19 | 1. 31 | 1. 49 | 1. 72 | 2 | 2. 34 | 1. 89 |
当前产品的零件
| 产品编号 | 描述 | 数量 |
|---|---|---|
| SA249006 | SA 05E811X260G1 | 1 EA |
| RA235872 | RA 05E811X260G1 | 1 EA |
| 35FN3002A05SP | EXFN, PLASTIC, 6. 376 OD, . 638 ID | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 06CB1001A01G | CONDUIT BOX, MACH GRAY | 1 EA |
| RM1016 | LEAD SEPARATOR GASKET - 305/306 C. P. MOTO | 1 EA |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X. 75 | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 10XN2520S06 | 1/4 20X3/8 HX HD CAP S. S. | 2 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| 05EP1100A02G | FREP TEFC 203, GRSR, RLF, DRAIN FITTING, INP | 1 EA |
| HW4601A22 | INPRO SEAL, 205 BRG, VBX | 1 EA |
| HW4600B36SP | V-RING SLINGER 1. 188 X 1. 690 X 0. 240 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| HW5100A05 | WVY WSHR F/205 & 304 BRGS | 1 EA |
| 05EP1100A01G | PUEP ENCL 205, BRG RET, GRSR, RLF, DRAIN FIT | 1 EA |
| HW4601A22 | INPRO SEAL, 205 BRG, VBX | 1 EA |
| HW4600B36SP | V-RING SLINGER 1. 188 X 1. 690 X 0. 240 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 2 EA |
| HA3100A37 | THRUBOLT 10-32 X 8. 500 | 4 EA |
| XY1032A02 | 10-32 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 35FH1000A19G | 35FH1000A19 W/GRAY FLUIDIZ | 1 EA |
| 10XN2520A16 | 1/4-20 X 1 HEX HEAD CAP SCR, ZINC PLATED | 3 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 3 EA |
| WD4100A03 | DE-750 HEYCO PLUG 62MP0750 MICRO PLASTIC | 1 EA |
| 06CB1503A01G | LIPPED CONDUIT BOX LID, MACH GRAY EPOXY | 1 EA |
| 06GS1009 | GASKET, KOBX LID, 1/8' THICK BLACK NEOPR | 1 EA |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA |
| MJ5004A59 | ADHESIVE LOCTITE #401 SURFACE INSENSITIV | 0. 01 EA |
| HW2501D13SP | KEY, 3/16 SQ X 1. 375 | 1 EA |
| HA7000A01 | KEY RETAINER 7/8' DIA SHAFT | 1 EA |
| MJ5001A01 | 46-665 RED SEALER | 0. 001 QT |
| MJ1000A73 | INPRO P-80 ASSEMBLY LUB. / 1 QT. CONTAINE | 0. 001 QT |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 4 EA |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| LT0019A00 | MOTOR NO-LOAD PERFORMANCE DATA SHEET | 1 EA |
| WD1000D21 | TRM, T&B #B71M, RING, 18-14, . 25, NON-INSL | 3 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 022 GA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1449 | DIV-2/NEC WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| NP2162E | SS IEEE841 DIV-2 UL CSA-C US EEV PREM | 1 EA |
| NP2113E | SS IEEE841 AUX DATA INFORMATION SURFACE | 1 EA |
| 36PA1000 | PACK GROUP W/LB5001 | 1 EA |
