产品规格
环境温度
40°C
底座指示器
刚性
导管盒材料
铸铁
设计代码
B
负载等级
CONT
外壳
全封闭风扇冷却(TEFC)
机架
182T
机架材料
铁
马力
1.5
赫兹
60
绝缘等级
F
逆变器代码
变频器就绪
最大速度
1800 RPM
电机标准
NEMA
电机重量
105
安装布置
F1
极数
6
整体长度
15.93 in
相位
3
功率因数
65
滑轮面代码
STANDARD
转/分钟
1100 - 1200
服务系数
1.15
轴径
1.125IN
轴接地指示器
无轴接地
轴旋转方向
可反转
速度代码
单速
同步转速
1200
电压
575
产品内容
| 输出 | 1. 5 HP |
| RPM | 1170 |
| 托盘数量 | 0 |
| 规格编号 | 06H759X237G1 |
| 框架 | 182T |
| 重量 | 112. 000 LB |
| 倍数 | SD |
| 外壳 | TEFC |
| 项目类型 | MOTOR |
| 制造工厂 | FT SMITH |
| 电压 | 575 |
| 极点 | 06 |
| 类 | STOCK |
| 类型 | 0630M |
| 状态 | Active |
| 商品代码 | 8501. 52. 4000 |
| 来源 | US |
| 防爆等级/组 | NONE |
| --- | --- |
| 修订 | C |
| 状态 | PRD/A |
| 更改 # | 783716 |
| 专有 | No |
| 类型 | AC |
| 产品类型 | 0630M |
| 电气规格 | 06WGX237 |
| CD 图 | CD0006 |
| 外壳 | TEFC |
| 制造工厂 | FT SMITH |
| 机械规格 | 06H759 |
| 布局 | 06LYH759 |
| 框架 | 182T |
| 安装 | F1 |
| 极点 | 06 |
| 创建日期 | 12/6/2010 |
| 基地 | RG |
| 旋转 | R |
| 绝缘 | F |
| 生效日期 | 2/5/2013 |
| 引线 | 3#16 |
| 文学 | |
| 电气图 | |
| 取代者 |
ECP83667T-5 的规格历史记录
| 有源 | 规格编号 | 植物 | 日期 | 描述 | |||||
|---|---|---|---|---|---|---|---|---|---|
| 06H759X237G1 | BALDOR/FT SMITH/REC WHSE #5 | 12/10/2010 | 30M 6P TEFC HOR 182T CHEM PROC SP#32-8 | ||||||
| 06H759W483G2 | BALDOR/FT SMITH/REC WHSE #5 | 5/18/2010 | 34M 6P TEFC HOR 182T CHEM PROC SP#32-8 | ||||||
| 铭牌编号 | NP2162E | ||||||||
| --- | --- | ||||||||
| CAT. NO. | ECP83667T-5 | ||||||||
| SPEC. | 06H759X237G1 | ||||||||
| SPEC. | 06H759X237G1 | ||||||||
| 电机重量 | 99 LBS | ||||||||
| HP | 1. 5 | ||||||||
| T. CODE | T3 | ||||||||
| 润滑脂 | POLYREX EM | ||||||||
| 伏特 | 575 | ||||||||
| 最大 KVAR | . 88 | ||||||||
| AMP | 2 | ||||||||
| # OF ROTOR BARS | 27 | ||||||||
| # OF STATOR SLOTS | 36 | ||||||||
| RPM | 1170 | ||||||||
| BLANK | |||||||||
| 框架 | 182T | HZ | 60 | PH | 3 | HTR-VOLTS | N/A | HTR-AMPS | N/A |
| SER. F. | 1. 15 | CODE | K | DES | B | CL | F | 最大空间加热器温度 | N/A |
| NEMA-NOM-EFF | 87. 5 | ||||||||
| PF | 65 | ||||||||
| G. MIN. EFF | 85. 5 | ||||||||
| CC | 010A | ||||||||
| 额定值 | 40C AMB-CONT | ||||||||
| DE | 6206 | ||||||||
| ODE | 6206 | ||||||||
| ENCL | TEFC | ||||||||
| SN | |||||||||
一般特征
| 满载扭矩 | 6. 77 LB-FT |
| 启动配置 | DOL |
| 空载电流 | 1. 29 Amps |
| 击穿扭矩 | 23. 8 LB-FT |
| 线性电阻 @ 25°C. | 11. 1 Ohms A Ph / 0 Ohms B Ph |
| 拉起扭矩 | 12. 4 LB-FT |
| 温度 额定负载上升 @. | 26°C |
| 锁定转子扭矩 | 15. 7 LB-FT |
| 温度 S. F. 负载上升 @. | 31°C |
| 启动电流 | 12. 9 Amps |
负载特性
| 额定负载 % | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| 功率因数 | 27 | 45 | 56 | 65 | 70 | 73 | 68 |
| 效率 | 76. 2 | 84. 8 | 86. 9 | 87. 6 | 87. 1 | 85. 8 | 87. 3 |
| 速度 (RPM) | 1194 | 1187 | 1179 | 1172 | 1163 | 1153 | 1167 |
| 线路安培 | 1. 35 | 1. 51 | 1. 74 | 2 | 2. 33 | 2. 7 | 2. 2 |
当前产品的零件
| 产品编号 | 描述 | 数量 | |
|---|---|---|---|
| SA213048 | SA 06H759X237G1 | 1 EA | |
| RA200274 | RA 06H759X237G1 | 1 EA | |
| 36FN3000C01SP | EXFN, PLASTIC, 5. 25 OD, . 912 ID | 1 EA | |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA | |
| 06CB1001A01G | CONDUIT BOX, MACH GRAY | 1 EA | |
| RM1016 | LEAD SEPARATOR GASKET - 305/306 C. P. MOTO | 1 EA | |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA | |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA | |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA | |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA | |
| 10XN2520G06 | 1/4 20X3/8 HX HD CAP, GREEN | 2 EA | |
| 06EP1132A02G | FREP TEFC 205, GRSR, RLF, DRAIN FITTING, INR | 1 EA | |
| HW4601A24 | INPRO SEAL, 206 BRG, VBX | 1 EA | |
| HW4500A32 | FIT. /EXT 1698-B (ALEMITE)GREASE FITTING | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 4 EA | |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA | |
| 51XN1032A20 | 10-32 X 1 1/4 HX WS SL SR | 4 EA | |
| HW5100A06 | W2420-025 WVY WSHR (WB) | 1 EA | |
| 06EP1132A01G | PUEP ENCL 206, BRG RET, GRSR, RLF, DRAIN FIT | 1 EA | |
| HW4601A24 | INPRO SEAL, 206 BRG, VBX | 1 EA | |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA | |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA | |
| HA3101A34 | THRUBOLT- 1/4-20 X 10. 375 | 4 EA | |
| XY2520A12 | 1/4-20 HEX NUT, DIRECTIONAL SERRATIONS | 4 EA | |
| 06FH1004A01G | FAN HOUSING MACH, W/GRAY EPOXY | 1 EA | |
| 10XN2520A20 | 1/4-20X 1 1/4 HEX HD X | 3 EA | |
| WD4100A02 | DP-1000 HEYCO PLUG OR 62MP1000 MICRO PL | 1 EA | |
| 06CB1503A01G | LIPPED CONDUIT BOX LID, MACH GRAY EPOXY | 1 EA | |
| 06GS1009 | GASKET, KOBX LID, 1/8' THICK BLACK NEOPR | 1 EA | |
| 10XN2520A12 | O1/4-20X 3/4 HEX HEAD CAP | 2 EA | |
| HW1001A25 | LOCKWASHER 1/4, ZINC PLT. 493 OD, . 255 I | 2 EA | |
| MJ5004A59 | ADHESIVE LOCTITE #401 SURFACE INSENSITIV | 0. 01 EA | |
| HW2501E16 | 3KEY, 1/4 SQ X 1. 750 | 1 EA | |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA | |
| MJ5001A01 | 46-665 RED SEALER | 0. 001 QT | |
| MJ1000A73 | INPRO P-80 ASSEMBLY LUB. / 1 QT. CONTAINE | 0. 001 QT | |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 4 EA | |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA | |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA | |
| LT0019A00 | MOTOR NO-LOAD PERFORMANCE DATA SHEET | 1 EA | |
| WD1000D21 | TRM, T&B #B71M, RING, 18-14, . 25, NON-INSL | 3 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 LB | |
| 51XB1214A16 | 12-14X1. 00 HXWSSLD SERTYB | 1 EA | |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 028 GA | |
| LB1119 | WARNING LABEL | 1 EA | |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA | |
| LB1449 | DIV-2/NEC WARNING LABEL | 1 EA | |
| LC0006 | CONNECTION LABEL | 1 EA | |
| NP2162E | SS IEEE841 DIV-2 UL CSA-C US EEV PREM | 1 EA | |
| NP2113E | SS IEEE841 AUX DATA INFORMATION SURFACE | 1 EA | |
| 36PA1001 | PACKAGING GROUP | 1 EA |
