产品规格
环境温度
40°C
底座指示器
刚性
导管盒材料
钢
设计代码
B
负载等级
CONT
外壳
TENV
机架
56C
机架材料
钢
马力
0.33
赫兹
60
绝缘等级
F
逆变器代码
Inverter Duty
电机标准
NEMA
电机重量
33
安装布置
F1
极数
4
整体长度
11.06 in
相位
3
功率因数
49
滑轮面代码
C-FACE
转/分钟
1700 - 1800
服务系数
1.25
轴径
0.625IN
轴接地指示器
无轴接地
轴旋转方向
可反转
速度代码
单速
同步转速
1800
电压
208-230/460
产品内容
| Enclosure | TENV (全封闭非通风) |
| Frame | 56C |
| Frame Material | Steel (钢) |
| Frequency | 60 Hz |
| Output @ Frequency | .330 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 208.0 V @ 60 HZ 230.0 V @ 60 HZ 460.0 V @ 60 HZ |
| XP Class and Group | None (无) |
| XP Division | Not Applicable (不适用) |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 C |
| Auxillary Box | No Auxillary Box (无辅助箱) |
| Auxillary Box Lead Termination | None (无) |
| Base Indicator | Rigid (刚性) |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None (无) |
| Current @ Voltage | .650 A @ 460.0 V 1.300 A @ 208.0 V 1.300 A @ 230.0 V |
| Design Code | B |
| Drip Cover | No Drip Cover (无防滴罩) |
| Duty Rating | CONT (连续) |
| Efficiency @ 100% Load | 75.5 % |
| Electrically Isolated Bearing | Not Electrically Isolated (非电气隔离) |
| Feedback Device | No Feedback (无反馈) |
| High Voltage Full Load Amps | 0.7 a |
| Front Face Code | Standard (标准) |
| Front Shaft Indicator | None (无) |
| Heater Indicator | No Heater (无加热器) |
| Insulation Class | F |
| Inverter Code | Not Inverter (非变频器) |
| KVA Code | P |
| Lifting Lugs | No Lifting Lugs (无吊耳) |
| Locked Bearing Indicator | Locked Bearing (锁定轴承) |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads (飞线) |
| Motor Lead Quantity/Wire Size | 9 @ 18 AWG |
| Motor Type | 3512M |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 11.06 IN |
| Power Factor | 61 |
| Product Family | Wash Down (冲洗) |
| Pulley End Bearing Type | Sealed Bearing (密封轴承) |
| Pulley Face Code | C-Face |
| Pulley Shaft Indicator | Standard (标准) |
| Rodent Screen | None (无) |
| Service Factor | 1.25 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End (皮带轮端) |
| Shaft Ground Indicator | No Shaft Grounding (无轴接地) |
| Shaft Rotation | Reversible (可逆) |
| Shaft Slinger Indicator | No Slinger (无甩油环) |
| Speed | 1755 rpm |
| Speed Code | Single Speed (单速) |
| Motor Standards | NEMA |
| Starting Method | Direct on line (直接在线) |
| Thermal Device - Bearing | None (无) |
| Thermal Device - Winding | None (无) |
| Vibration Sensor Indicator | No Vibration Sensor (无振动传感器) |
| Winding Thermal 1 | None (无) |
| Winding Thermal 2 | None (无) |
