产品规格
环境温度
40°C
底座指示器
无安装
导管盒材料
铸铁
设计代码
B
负载等级
CONT
外壳
全封闭风扇冷却(TEFC)
机架
184TC
机架材料
铁
马力
5
赫兹
60
绝缘等级
F
逆变器代码
Inverter Duty
最大速度
2700 RPM
电机标准
NEMA
电机重量
128
安装布置
F1
极数
4
整体长度
16.69 in
相位
3
功率因数
81
滑轮面代码
C-FACE
转/分钟
1700 - 1800
服务系数
1.15
轴径
1.125IN
轴接地指示器
无轴接地
轴旋转方向
可反转
速度代码
单速
同步转速
1800
电压
460
产品内容
| 输出 | 5 HP |
| 转速 | 1750 |
| 托盘数量 | 0 |
| 规格编号 | 06G105X203G2 |
| 机架 | 184TC |
| 重量 | 128. 000 磅 |
| 乘数 | SD |
| 外壳 | TEFC |
| 物料类型 | 电机 |
| 制造工厂 | FT SMITH |
| 电压 | 460 |
| 极数 | 04 |
| 等级 | STOCK |
| 类型 | 0641M |
| 状态 | Active（有效） |
| 商品代码 | 8501. 52. 4000 |
| 原产地 | US |
| 防爆等级/组别 | NONE |
| --- | --- |
| 修订 | A |
| 状态 | PRD/A |
| 更改 # | 783716 |
| 专有 | No |
| 类型 | AC |
| 产品类型 | 0641M |
| 电气规格 | 06WGX203 |
| CD 图 | CD0006 |
| 外壳 | TEFC |
| 制造工厂 | FT SMITH |
| 机械规格 | 06G105 |
| 布局 | 06LYG105 |
| 机架 | 184TC |
| 安装 | F1 |
| 极数 | 04 |
| 创建日期 | 4/4/2012 |
| 底座 | N |
| 旋转 | R |
| 绝缘 | F |
| 生效日期 | 2/5/2013 |
| 引线 | 3#16 |
| 文献 | |
| 电气图 | |
| 替换为 |
VECP83665T-4 的规格历史
| 有效 | 规格编号 | 工厂 | 日期 | 描述 | |||||
|---|---|---|---|---|---|---|---|---|---|
| 06G105X203G2 | BALDOR/FT SMITH/REC WHSE #5 | 4/9/2012 | 41M 4P TEFC VER 184TC CHEM PROC SP#32-8 | ||||||
| 06G105W569G3 | BALDOR/FT SMITH/REC WHSE #5 | 5/18/2010 | 43M 4P TEFC VER 184TC CHEM PROC SP#32-8 | ||||||
| 铭牌编号 | NP2162E | ||||||||
| --- | --- | ||||||||
| CAT. NO. | VECP83665T-4 | ||||||||
| SPEC. | 06G105X203G2 | ||||||||
| SPEC. | 06G105X203G2 | ||||||||
| 电机重量 | 131 磅 | ||||||||
| HP | 5 | ||||||||
| T. CODE | T3 | ||||||||
| 润滑脂 | POLYREX EM | ||||||||
| 电压 | 460 | ||||||||
| 最大无功功率 | 1. 21 | ||||||||
| AMP | 6. 6 | ||||||||
| # 转子条 | 28 | ||||||||
| # 定子槽 | 36 | ||||||||
| 转速 | 1750 | ||||||||
| BLANK | |||||||||
| FRAME | 184TC | HZ | 60 | PH | 3 | HTR-VOLTS | N/A | HTR-AMPS | N/A |
| SER. F. | 1. 15 | CODE | J | DES | B | CL | F | MAX. SPACE HEATER TEMP. | N/A |
| NEMA-NOM-EFF | 89. 5 | ||||||||
| PF | 79 | ||||||||
| G. MIN. EFF | 87. 5 | ||||||||
| CC | 010A | ||||||||
| 额定值 | 40C AMB-CONT | ||||||||
| DE | 6206 | ||||||||
| ODE | 6206 | ||||||||
| ENCL | TEFC | ||||||||
| SN | |||||||||
一般特性
| 满载扭矩 | 15. 06 磅-英尺 |
| 启动配置 | DOL |
| 空载电流 | 3. 15 安培 |
| 击穿扭矩 | 48. 3 磅-英尺 |
| 线-线电阻 @ 25°C. | 2. 48 欧姆 A 相 / 0 欧姆 B 相 |
| 拉起扭矩 | 28. 7 磅-英尺 |
| 温升 @ 额定负载 | 52°C |
| 锁定转子扭矩 | 33. 4 磅-英尺 |
| 温升 @ S. F. 负载 | 65°C |
| 启动电流 | 45. 5 安培 |
负载特性
| 额定负载的百分比 | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| 功率因数 | 41 | 62 | 74 | 79 | 82 | 83 | 81 |
| 效率 | 85. 6 | 89. 9 | 90. 4 | 89. 5 | 88. 2 | 86. 2 | 88. 7 |
| 速度 (RPM) | 1787. 9 | 1775. 8 | 1763 | 1748. 8 | 1732. 3 | 1713. 2 | 1739 |
| 线路安培数 | 3. 48 | 4. 26 | 5. 34 | 6. 63 | 8. 11 | 9. 79 | 7. 52 |
当前产品的零件
| 产品编号 | 描述 | 数量 |
|---|---|---|
| SA250089 | SA 07M323Y929G1 | 1 EA |
| RA236949 | RA 07M323Y929G1 | 1 EA |
| 36FN3000C02 | EXFN, PLASTIC, 5. 25 OD, 1. 175 ID | 1 EA |
| HW3201A05 | 3/8-16 EYEBOLT | 1 EA |
| 09CB1002A05G | CONDUIT BOX, 1. 00 N. P. T. (GRAY) | 1 EA |
| RM1017 | LEAD SEPERATOR GASKET MODEL 307 1/8' THK | 1 EA |
| 51XW2520A12 | . 25-20 X. 75, TAPTITE II, HEX WSHR SLTD | 2 EA |
| 11XW1032G06 | 10-32 X. 38, TAPTITE II, HEX WSHR SLTD U | 1 EA |
| HW3001B01 | 003SS CUP WASHER, FOR #8 SCREW | 1 EA |
| 10XN2520S06 | 1/4 20X3/8 HX HD CAP S. S. | 2 EA |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 2 EA |
| 07EP1119A02G | 206 BRG, C. I. FH, GRSR, RLF, DRAIN FITTING, IN | 1 EA |
| HW4601A25 | 200. O SEAL, 307 BRG, VBX, | 1 EA |
| 10XN2520A26 | 1/4-20X 1 5/8 HEX HD | 4 EA |
| HW4600B44SP | V-RING SLINGER 1. 500 X 2. 290 X 0. 280 | 1 EA |
| HW4500A32 | FIT. /EXT 1698-B (ALEMITE)GREASE FITTING | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4010A01 | DRAIN PLUG, 416 S. S., W/ 1/4-28 THD &. 076 | 1 EA |
| HW5100A08 | W3118-035 WVY WSHR (WB) | 1 EA |
| 37EP1314A01G | PU ENDPLATE, MACH GRAY | 1 EA |
| HW4601A25 | 200. O SEAL, 307 BRG, VBX, | 1 EA |
| HW4600B44SP | V-RING SLINGER 1. 500 X 2. 290 X 0. 280 | 1 EA |
| HW4500A01 | 1641B(ALEMITE)400 UNIV, GREASE FITT | 1 EA |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA |
| HW4500A17 | 317400 ALEMITE GREASE RELIEF | 1 EA |
| HA4002A01 | DRAIN PLUG STAINLESS STL | 1 EA |
| 10XN2520A30 | HEX HD CAP SCREW-STD THD-. 25 X 20 THD PE | 4 EA |
| 51XB1214A20 | 12-14X1. 25 HXWSSLD SERTYB | 1 EA |
| XY3118A12 | 5/16-18 HEX NUT DIRECTIONAL SERRATION | 4 EA |
| 07FH1001A01G | SPL FAN HOUSING, 307, W/GREASER, GRAY EP | 1 EA |
| 10XN2520A28 | 1/4-20X 1 3/4 HEX HD | 3 EA |
| WD4100A02 | DP-1000 HEYCO PLUG OR 62MP1000 MICRO PL | 1 EA |
| 12CB1503A03G | CONDUIT BOX LID, MACH (GRAY), WITH LIP | 1 EA |
| 09GS1013A01 | 09 GS FOR 09CB3501 LID - BLACK NEOPRENE | 1 EA |
| 10XN2520A18 | 1/4-20 X 1-1/8 HEX CAP SCREW. | 2 EA |
| MJ5004A59 | ADHESIVE LOCTITE #401 SURFACE INSENSITIV | 0. 01 EA |
| HW2501F21 | KEY, 5/16 SQ X 2. 375 | 1 EA |
| HA7000A02 | KEY RETAINER RING, 1 1/8 DIA, 1 3/8 DIA | 1 EA |
| MJ5001A01 | 46-665 RED SEALER | 0. 001 QT |
| MJ1000A73 | INPRO P-80 ASSEMBLY LUB. / 1 QT. CONTAINE | 0. 001 QT |
| 85XU0407S04 | 4X1/4 U DRIVE PIN STAINLESS | 4 EA |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA |
| LB1002 | LABEL, MARINE DUTY (ON ROLLS) | 1 EA |
| LT0019A00 | MOTOR NO-LOAD PERFORMANCE DATA SHEET | 1 EA |
| WD1000D21 | TRM, T&B #B71M, RING, 18-14, . 25, NON-INSL | 3 EA |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 05 磅 |
| MG1025N19 | PAINT, 778. 50 WILKO, RELIANCE ELEC GREEN | 0. 036 GA |
| HA3104A32 | THRUBOLT- 5/16-18 X12. 750 | 4 EA |
| LB1119 | WARNING LABEL | 1 EA |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 1 EA |
| LC0006 | CONNECTION LABEL | 1 EA |
| LB1449 | DIV-2/NEC WARNING LABEL | 1 EA |
| NP2162E | SS IEEE841 DIV-2 UL CSA-C US EEV PREM | 1 EA |
| NP2113E | SS IEEE841 AUX DATA INFORMATION SURFACE | 1 EA |
| 07PA1011 | PKG GRP, 07 CAST IRON PK1181 | 1 EA |
| 07PA1095 | PKG GRP, VER 07 CAST IRON | 1 EA |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
