Enerpac PACG-5002SB Turbo II 泵 5000 SAE 带压力表 带支架

Model: PACG5002SB | ECCN:EAR99 | Harmonization:8413500080 Series: PACG | Product Line: Workholding Tools Enerpac PACG Air Hydraulic Pumps are for designed for intermittent to medium duty workholding applications up to 5,000 psi. Valve mount options include, remote, and mountings for DO3 and VP valves. Enerpac Turbo II Air Over Hydraulic Pumps generate the hydraulic pressure you need using the air pressure you have available. The Air Saver Piston reduces air consumption, and the pump can start at low pressures from 50-125 psi. Turbo II Air-Hydraulic Pumps are best suited to medium or lower cycle applications. They provide the power and speed needed for simple clamping circuits and mostly single acting tools. At only 75 dBA, the Turbo II Series helps to keep the noise level to a minimum. Choose from a range with maximum working pressure of either 5,000 or 10,000psi, and various reservoir capacities from 116 - 462 in3 (2100 - 7500 cm3). Turbo II Air Over Hydraulic Pump Series: * PATG - Treadle for foot or hand operation * PARG - Pendant Operation * PAMG - Manual lever operated. For double-acting applications * PACG - For remote valve mount. For workholding, 5000 psi (350 bar). * PASG - Includes mount for a single DO3 Valve. For workholding, 5000 psi (350 bar). * On-demand stall-restart operation maintains system pressure, providing clamping security * External adjustable pressure relief valve (behind sight glass) * Internal pressure relief valve provides overload protection * Reduced noise level to 75 dBA * Operating air pressure: 50-125 psi - enables pump to start at low air pressure* * Hydraulic to air ratio: 45:1 * Reinforced heavy-duty lightweight reservoir for applications in tough environments * Five valve mounting options provide flexibility in setup and operation * Fully serviceable air motor assembly * User supplied valves * NOTE: From 50-125 psi air inlet pressure. Performance is significantly diminished below 50 psi. Performance may vary compared to listed values due to seal friction, internal pressure drops and manufacturing tolerances. Be sure to allow some flexibility on air inlet pressure. Enerpac PACG气动液压泵专为高达 5,000 psi 的间歇性到中等负荷的工件夹紧应用而设计。阀门安装选项包括远程安装以及 DO3 和 VP 阀门的安装。 Enerpac Turbo II 气动液压泵利用您可用的气压产生所需的液压。 Air Saver 活塞可减少空气消耗，并且泵可以在 50-125 psi 的低压下启动。 Turbo II 气动液压泵最适合中等或较低循环应用。 它们为简单的夹紧回路和主要单作用工具提供所需的动力和速度。 Turbo II 系列的噪音仅为 75 dBA，有助于将噪音水平降至最低。 从最大工作压力为 5,000 或 10,000psi 的范围内进行选择，各种储液罐容量从 116 - 462 in3 (2100 - 7500 cm3) 不等。 Turbo II 气动液压泵系列： * PATG - 用于脚或手操作的脚踏阀 * PARG - 悬挂操作 * PAMG - 手动杠杆操作。 适用于双作用应用 * PACG - 用于远程阀门安装。 用于工件夹紧，5000 psi (350 bar)。 * PASG - 包括单个 DO3 阀门的安装座。 用于工件夹紧，5000 psi (350 bar)。 * 按需失速重启操作可保持系统压力，从而提供夹紧安全性 * 外部可调压力释放阀（在观察孔后面） * 内部压力释放阀提供过载保护 * 降低噪音水平至 75 dBA * 工作气压：50-125 psi - 使泵能够在低气压下启动* * 液压与空气之比：45:1 * 增强型重型轻型储液罐，适用于恶劣环境中的应用 * 五个阀门安装选项在设置和操作方面提供了灵活性 * 完全可维修的气动马达组件 * 用户提供的阀门 * 注意：来自 50-125 psi 进气压力。 低于 50 psi 时，性能会显着下降。 由于密封摩擦、内部压降和制造公差，性能可能与列出的值有所不同。 请务必在进气压力方面留出一定的灵活性。