产品规格
轴承类型
径向
保持架
金属
外壳
双重密封
内径
1.575
锁定
无
外径
3.15
产品内容
项目详情
| 制造商: | MRC Bearing Service |
| 重量: | 1. 114 lbs. |
| 产品名称: | Felt Seal Replacement Bearing |
| 描述: | Wide Inner Ring Bearing, 40 mm ID x 80 mm OD x 1. 0625" Wide, Double Sealed With Snap Ring (Contact), Standard Precision (ABEC 1), Steel Cage, Normal Clearance (C0) |
规格
| Inch/Metric | Metric Bore |
| Bore Type | Round Bore |
| I. D. | 40 mm |
| O. D. [Min] | |
| O. D. [Max] | |
| O. D. | 80 mm |
| Width [Min] | |
| Width [Max] | |
| Width | 26. 9875 mm |
| Enclosure | Double Sealed |
| Rows of Balls | Single |
| Material | Steel |
| O. D. Type | Straight w/ Snap Ring |
| Bearing Type | Radial |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Ambient Temperature Range [Min] | |
| Ambient Temperature Range [Max] | |
| Ball Material | Steel |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Contact Angle | 0° |
| Guide Type | |
| Lubrication | |
| Outer Ring Width | 21 mm |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Seal Material | Rubber |
| Seal Type | Contact Seals |
| Seal Width | |
| Dynamic Load Rating | 6540 lbf |
| Static Load Rating [Max] | 4050 lbf |
| Ball Dia. | |
| Bearing Design | |
| Bore B | |
| Cage Material | Steel |
| Collar No. | |
| Collar O. D. | |
| Collar Width | |
| Corner Radius [Min] | |
| Eccentric Collar Offset | |
| Fillet Radius | 0. 04 in |
| Flange O. D. [Max] | |
| Flange O. D. | |
| Flange Width [Max] | |
| Flange Width | |
| Flush Ground | |
| Housing Shoulder Diameter [Min] | |
| Housing Shoulder Diameter [Max] | |
| Housing Shoulder Diameter | |
| Industry Standard Part # | |
| Inner Ring O. D. | |
| Inner Ring Offset | |
| Inner Ring Width | 1. 063 in |
| Internal Design | |
| Limiting Speed | 5600 rpm |
| Limiting Speed - Grease | 5600 rpm |
| Limiting Speed - Oil | |
| Limiting Speed - Sealed | |
| Locking Device | No Locking Device |
| Lube Hole Center | |
| Lubricant | Polyurea Base |
| Misalignment Range | |
| No. in Set | Single Bearing |
| No. of Balls | |
| O. D. (B) | |
| Outer Ring | |
| Outer Ring Inner Diameter | |
| Outer Ring Size | |
| Peak Running Torque (mg-mm) | |
| Peak Starting Torque (mg-mm) | |
| Pre Lubricant | |
| Preload Amount | |
| Radial Internal Clearance | Normal |
| Radial Load Rating [Max] | |
| Radial Rigidity (lbf/µm) | |
| Reference Speed | |
| Seal O. D. | |
| Seal Protection Width | |
| Seating Washer | |
| Series | |
| Set Screw Offset | |
| Set Screw Size | |
| Shaft Shoulder Diameter [Min] | |
| Shaft Tolerance | |
| Snap Ring | With Snap Ring |
| Snap Ring O. D. | |
| Snap Ring Offset | |
| Snap Ring Thickness | |
| Special Features | |
| Stamping | |
| Static Thrust Load Rating [Max] | |
| Temperature Range [Min] | -22 °F |
| Temperature Range [Max] | 250 °F |
| Use With | |
