| A |
52 mm |
|
| C 8 |
206 mm |
|
| H |
38 mm |
|
|
|
|
| --- |
--- |
--- |
| A 2 |
41 mm |
Tolerance: +/-0,1 |
| C |
206 mm |
|
| C 1 |
158 mm |
|
| C 2 |
102 mm |
Tolerance: +/-0,1 |
| C 9 |
172 mm |
Minimum support length |
| H 1 |
0,2 mm |
|
| h 4 |
31 mm |
|
| K 2 |
M8 |
According to DIN 912-12. 9The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230. |
| K 3 |
M6 |
According to DIN 912-12. 9The values apply to screws with a preservative. If there is a possibility of settling, the screws should be secured against rotation. It must be ensured that the adjacent construction has adequate strength. See VDI Guideline 2230. |
| L w |
20 mm |
|
| t |
14 mm |
|
|
|
|
| --- |
--- |
--- |
| m |
2,28 kg |
Mass |
| C |
305000 N |
|
| C 0 |
265000 N |
|
|
DIN 3 405-AM6 |
Funnel type lubrication nippleIf the lubrication nipple is replaced by a tube or hose connector, the maximum screw length cannot be more than 6mm. |
|
|
Hole connectors on both sides for either funnel type lubrication nipples to DIN 3405-D6 (supplied loose) or pipe or tube connections. Close off holes with lubrication nipples if no lubrication connectors are to be used. |
