Description
TENDO EC CAT-DC40 Ø20x64.5, Toolholder
* 双接触液压胀紧刀柄
* Series: TENDO E compact Dual Contact
* Toolholder interface: CAT-DC 40
* Clamping diameter: 20 mm
* Projecting length: 64.5 mm
* Run-out accuracy: ≤ 0.003 mm at 2.5 x D
* Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
* Min. torque: 520 Nm
Scope of delivery: Does not include actuation key
General notes about the series
| Version |
TENDO E compact (E compact = excellent cost-performance ratio) Short, rigid design |
| Run-out accuracy |
≤ 0.003 mm at 2.5 x D |
| Balancing grade |
G2.5 at 25,000 RPM or Umax < 1 gmm |
| Tool shank quality |
h6 |
| Intermediate sleeves |
Additional shank diameters can be clamped using intermediate sleeves |
| Data carrier |
Bore for data carrier as an option |
| Toolholder changes |
For automatic toolholder changes |
| Coolant supply |
Coolant supply according to ASME B5.50 Bores for form AF are sealed with set screws as transport safety |
| Flange contact |
Similar to ASME B5.50 however with face contact Dual Contact version with simultaneous tapered and flat work surfaces |
| Length adjustment screw |
With set-screw for axial length adjustment |
| Scope of delivery |
Does not include actuation key |
| Individual |
Additional sizes and customized designs are available upon request |
Technical data TENDO EC CAT-DC40 Ø20x64.5
| ID: |
1324767 |
| Technology: |
双接触液压胀紧刀柄 |
| Series: |
TENDO E compact Dual Contact |
| Toolholder interface: |
CAT-DC 40 |
| Clamping diameter D1: |
20 mm |
| D2 [mm]: |
49 |
| D6 [mm]: |
38 |
| Projecting length L1 [mm]: |
64.5 |
| L2 [mm]: |
51 |
| L3 [mm]: |
10 |
| L4 [mm]: |
45.45 |
| G: |
M8x1 |
| Min. torque [Nm]: |
520 |
| Weight [kg]: |
1.3 |
