Description
TENDO WZS CAT50 50 Ø7/8"x111, 刀具磨削刀柄
* TENDO WZS
* 液压胀紧刀柄
* 刀柄接口: CAT 50
* 夹紧直径 D1: 7/8"
* 伸出长度 L1: 111 mm
* 回转精度: < 0.003 mm at 2.5 x D
* 平衡等级: G2.5 at 25,000 RPM 或 Umax < 1 gmm
* 最小扭矩: 100 Nm
供货范围: 不包括驱动扳手,
General notes about the series
| Version |
用于刀具刃磨和磨削机床，手动驱动。短而坚固的设计 |
| Run-out accuracy |
< 0.003 mm at 2.5 x D |
| Balancing grade |
G2.5 at 25,000 RPM 或 Umax < 1 gmm |
| Tool shank quality |
h6 |
| Intermediate sleeves |
可以使用中间套筒夹紧其他刀柄直径 |
| Coolant supply |
根据 ASME B5.50 的冷却剂供应 |
| Length adjustment screw |
带用于轴向长度调节的定位螺钉 |
| Scope of delivery |
不包括驱动扳手 |
| Individual |
可根据要求提供其他尺寸和定制设计 |
Technical data TENDO WZS CAT50 50 Ø7/8"x111
| ID: |
28000633 |
| Technology: |
液压胀紧刀柄 |
| Series: |
TENDO WZS |
| Toolholder interface: |
CAT 50 |
| Toolholder standard: |
ASME B5.50 |
| Clamping diameter D1: |
7/8" |
| D2 [mm]: |
45.2 |
| D3 [mm]: |
69.85 |
| D6 [mm]: |
31 |
| L1 [mm]: |
111 |
| L2 [mm]: |
52 |
| L3 [mm]: |
10 |
| L4 [mm]: |
41 |
| L5 [mm]: |
79 |
| G: |
M16x1 |
| Min. torque [Nm]: |
100 |
| Weight [kg]: |
2.8 |
