Leeson 096001.00 0.08 马力 交流齿轮马达，单相，9 RPM，110 V，42Y 框架，TENVLeeson096001.000.08 马力 交流齿轮马达，单相，9 RPM，110 V，42Y 框架，TENV

Regal Beloit Leeson&Reg 096001.00

UPC: 691720000779 | UNSPSC: 20101617 | GTIN:

Gear Reducers & Gearmotors > Gearmotors > Offset Parallel Shaft Gearmotors > Helical Offset Gearmotors

LEESON® Gear Motor, Parallel Shaft Continuous Duty, Series: PE350, 115/230 VAC, 1.6/0.8 A Full Load Amperage, 0.08 hp, 60 Hz, 1, 9 rpm Maximum, 3/4 in Shaft Dia, 1-5/8 in Shaft Length, Reversible, 341 in-lb, 180:1 Gear Ratio, Permanent Split Capacitor Motor, Ball Bearing, 491 lb Overhung Load, Special Mount, 40 deg C Ambient, Class F Insulation, Totally Enclosed Nonvented (TENV), Die Cast Aluminum Housing, 11.36 in L x 5.57 in H

Features:

• Rugged die cast aluminum gear housing for maximum gear and bearing support
• Precision machined gearing and hardened for maximum load capability
• All gearing designed and rated to AGMA class 9 standards and to withstand momentary shock overload of 200%
• Oversized output bearings for greater overhung load capacity and long life
• High carbon alloy output shaft provides maximum strength and rigidity
• All needle bearing journals are precision ground after heat treating to provide maximum fit and finish
• Heavy duty industrial oil seals keep lubricant in and dirt out
• Gears and bearings are splash lubricated with permanent, heavy duty gear oil
• Run capacitor supplied at no additional cost for single phase designs
• Overhung load capacities shown are at center of output shaft

• These gear motors are designed for mounting at any angle

  Specs:

• Series: PE350

• Type: Parallel Shaft Continuous Duty
• Maximum Speed: 9 rpm
• Dimensions: 11.36 in L x 5.57 in H
• Shaft Length: 1-5/8 in
• Voltage Rating: 115/230 VAC
• Mounting Type: Special
• Insulation Type: Class F
• Motor Type: Permanent Split Capacitor
• Rotation Type: Reversible
• Housing Material: Die Cast Aluminum
• Frequency Rating: 60 Hz
• Enclosure Type: Totally Enclosed Nonvented (TENV)
• Temperature Rating: 40 deg C Ambient
• Gear Ratio: 180:1
• Bearing Type: Ball
• Horsepower: 0.08 hp
• Shaft Diameter: 3/4 in
• Phase: 1
• Torque Rating: 341 in-lb
• Full Load Amperage: 1.6/0.8 A
• Overhung Load: 491 lb

  Certifications/Standards:

AGMA Class 9 | CSA Certified | UL Listed

Warranty:

1 Year