产品规格
内径
5/8英寸
外径
13/16 英寸
产品内容
Bunting Bearings Llc Bunting&Reg EXEF101320
UPC: 717905224461 | UNSPSC: 31171501 | GTIN:
Bearings > Plain & Sleeve Bearings > Plain Sleeve & Flanged Bearings
Bunting® Flanged Bearing, Extra, 5/8 in Bore, 13/16 in OD, 1-1/4 in Width, 1 in Diameter Flange, 1/8 in Flange Width, PTFE Groove/Plug, -40 to 460 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated
Features:
- Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
- Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
- Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
- For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
- Proper running clearance for bearings depends to a great extent on the particular application
- Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
- Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
- Properly stored and protected against dust, oil-impregnated bearings retain their oil supply
- These bearings contain SAE 90 oil with a finely dispersed PTFE
- The PTFE in the oil greatly reduces friction and helps to develop a full lubrication film which is especially required on start up
A smoother and quieter operation, an easier break-in period and longer life can be achieved
Specs:
Maximum PV Rating: 50000
- Maximum Velocity: 1200 sfpm
- Groove/Plug Type: PTFE
- Bearing Material: Sintered Bronze
- Flange Width: 1/8 in
- Flange Diameter: 1 in
- Temperature Rating: -40 to 460 deg F
- Maximum Pressure: 2000 psi
- Bore Diameter: 5/8 in
- Outside Diameter: 13/16 in
- Finish: Powder Coated
- Width: 1-1/4 in
- Type: Extra
Certifications/Standards:
ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B5687 Military Specification | OSHA Standard 29 CFR 1910.120 | SAE 841
Warranty:
90 Days
