产品规格
内径
1 3/4 英寸
外径
2 in
产品内容
Bunting Bearings Llc Bunting&Reg ECOP283216
UPC: 717905223266 | UNSPSC: 31171509 | GTIN:
轴承 > Plain 轴承和套筒轴承 > Plain 套筒轴承和法兰轴承
Bunting® Plain Sleeve Bearing，系列：ECO，1-3/4 in Bore，2 in OD，1 in Width，10 to 220 deg F，2000 psi Maximum，1200 sfpm Maximum Velocity，50000 Maximum PV，Sintered Bronze Bearing，Powder Coated
Features:
- Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
- Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
- Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
- For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
- Proper running clearance for bearings depends to a great extent on the particular application
- Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
- Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass
Properly stored and protected against dust, oil-impregnated bearings retain their oil supply
Specs:
Maximum PV Rating: 50000
- Maximum Velocity: 1200 sfpm
- Bearing Material: Sintered Bronze
- Temperature Rating: 10 to 220 deg F
- Maximum Pressure: 2000 psi
- Bore Diameter: 1-3/4 in
- Outside Diameter: 2 in
- Finish: Powder Coated
- Width: 1 in
- Series: ECO
Certifications/Standards:
ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | MIL-B5687 Military Specification | OSHA Standard 29 CFR 1910.120 | SAE 841 | USDA H-1 Approved
Warranty:
90 Days
