BUNTING AA1407 1- 1/4 X 1- 7/16 X 1- 3/4 SAE841 标准滑动轴承

Bunting Bearings Llc Bunting&Reg AA1407

UPC: 717905006036 | UNSPSC: 31171509 | GTIN:

轴承 > plain轴承和套筒轴承 > Plain Sleeve & Flanged Bearings

Bunting® Plain Sleeve Bearing, 1-1/4 in Bore, 1-7/16 in OD, 1-3/4 in Width, 10 to 220 deg F, 2000 psi Maximum, 1200 sfpm Maximum Velocity, 50000 Maximum PV, Sintered Bronze Bearing, Powder Coated

Features:

• Smooth housing bore chamfers reduce bearing installation time and eliminate press fit loss due to the shearing of metal from the bearing OD
• Tooling for production of stamped housings should be designed to provide a radius edge which will act as a lead and furnish clearance for flange fillet
• Sleeve cylindrical journal bearings are commonly installed by press fitting the bearing into a housing with an insertion arbor
• For housings rigid enough to withstand the press fit without appreciable distortion and for bearings with thickness approximately one eighth of the bearing OD
• Proper running clearance for bearings depends to a great extent on the particular application
• Only minimum recommended clearances for oil-impregnated bearings used with ground steel shafting
• Oil-impregnated units should be stored in suitable containers using plastic bags, wax paper, metal, glass

• Properly stored and protected against dust, oil-impregnated bearings retain their oil supply

  Specs:

• Maximum PV Rating: 50000

• Maximum Velocity: 1200 sfpm
• Bearing Material: Sintered Bronze
• Temperature Rating: 10 to 220 deg F
• Maximum Pressure: 2000 psi
• Bore Diameter: 1-1/4 in
• Outside Diameter: 1-7/16 in
• Finish: Powder Coated
• Width: 1-3/4 in

  Certifications/Standards:

ANSI/ASQC Z1.4 | ASTM B438 | CBSA/NFFS/PTDA Association | CT-1000-K26 Metal Powder Industries Federation | MIL-B-5687D Military Specification | OSHA Standard 29 CFR 1910.1200 | SAE 841

Warranty:

90 Days