产品规格
Additional Note1
仅通过头部端重新润滑
Additional note4
C 滚道宽度公差为 +0.00/-0.12 mm
B2
不适用
基本动态负载额定值 (牛顿)
3800
基本负载额定值（滚轮轴承）静态（牛顿）
3300
基本静态负载额定值 (牛顿)
3750
C1
0.6
d2
12
M
4
M1
不适用
质量 (克)
20
最大速度 (rpm)
22000
总长度 (毫米)
28
滚轮外径 (mm)
16
滚轮宽度 (mm)
11
rs
0.15
SMITH 轴承编号
MCR-16
螺柱直径 (mm)
6
螺柱长度 (mm)
16
螺纹 (mm)
M6 x 1
螺纹长度 (mm)
8
滚轮轴承动态负载(牛顿)
3150
产品内容
| Specifications: | （规格： | |
|---|---|---|
| (D) Roller O.D. (mm) | 16 | |
| (C) Roller Width (mm) | 11 | |
| (d) Stud Dia. (mm) | 6 | |
| (B1) Stud Length (mm) | 16 | |
| (C) Basic Dynamic Load Rating (newtons) | 3800 | |
| (G1) Thread Length (mm) | 8 | |
| B2 | N/A | |
| (B) Overall Length (mm) | 28 | |
| (G) Thread (mm) | M6 x 1 | |
| (g) Mass (grams) | 20 | |
| (Cow) Basic Load Rating (Track Roller) Static (newtons) | 3300 | |
| (Co) Basic Static Load Rating (newtons) | 3750 | |
| d2 | 12 | |
| SMITH Bearing Number | MCR-16 | |
| M | 4 | |
| (n) Max. Speed (rpm) | 22000 | |
| M1 | N/A | |
| rs | 0.15 | |
| C1 | 0.6 | |
| Additional Note1 | Relubricate through head end only（只能通过头部末端重新润滑） | |
| Additional note2 | The basic load rating C and Co apply if the bearing outer ring (with cylindrical outside surface) is mounted in a housing bore with the normal rolling bearing fit. When used as a track roller, the load rating Cw and Cow apply. （如果轴承外圈（具有圆柱形外表面）以正常的滚动轴承配合安装在轴承座孔中，则基本额定载荷 C 和 Co 适用。当用作滚轮时，额定载荷 Cw 和 Cow 适用。） | |
| Additional note3 | Limit speed for grease lubrication: For oil lubrication speed may be increased by up to 30% （润滑脂润滑的极限速度：对于油润滑，速度最多可提高 30%） | |
| Additional note4 | Tolerance for "C" Raceway Width is +0.00/-0.12 mm （“C”滚道宽度的公差为 +0.00/-0.12 毫米） | |
| (Cw) Track Roller Dynamic Load(newtons) | 3150 |
